Gutter Systems & Repair | Advanced Level Roofers
Gutter Systems

Gutter Systems

Designed, Installed, and Maintained for Your Home

Your gutter system works alongside your eavestroughs and downspouts to manage the complete water path from roof to grade.

In Canada, “eavestroughs” and “gutters” are often used interchangeably; both refer to the channel at the roof edge that collects and directs water. We use both terms because homeowners search both ways, and because the underlying system is the same: a drainage channel that must be properly sized, pitched, supported, and maintained to protect your home from water damage.

Whether you need a completely new gutter system, targeted repairs to failing sections, or a full replacement of an aging installation, we design every solution based on your roof’s specific geometry and your climate’s drainage demands.

Gutter Services

Add new item icon with plus

New Gutter Installation

Complete gutter system design and installation. We start by calculating the optimal gutter size (5” or 6”), downspout placement, and pitch for maximum drainage performance based on your specific roof geometry. Every installation uses hidden hanger systems for structural strength, sealed joints for leak prevention, and proper integration with existing or new downspout routing.

We inspect the fascia condition before mounting any new system—rotted or damaged fascia is replaced first because no gutter can perform properly on a compromised mounting surface.

gutter repair icon

Gutter Repair

Targeted repairs for specific failures without replacing the entire system. Common repairs include:

  • Sagging sections — hangers replaced, pitch re-established, and structural integrity restored
  • Leaking joints — old sealant removed, surfaces cleaned, and professional-grade sealant applied
  • Separated sections — reconnected and resealed with proper overlap and fastening
  • Ice-damaged profiles — deformed sections replaced and hanger spacing tightened to prevent recurrence
  • Loose or missing hangers — upgraded to a hidden hanger system where possible
  • End cap leaks — resealed or replaced depending on condition

When repair estimates exceed 30–40% of the cost of a full replacement on a system older than 15 years, replacement is usually the more economical decision.

gutter replacement icon

Gutter Replacement

When repair isn’t economically viable, we remove the old system completely, including all hangers, spikes, and fasteners, and install a properly sized replacement. Replacement is recommended when gutters sag in multiple locations, joints leak at several points, the aluminum profile is deformed from ice or impact, or the underlying fascia requires structural repair.

Replacement is often coordinated with roof replacement for efficiency; the eavestrough system is typically removed during a roof tear-off, making it the ideal time to install a properly sized new system.

What Happens When Gutters Fail

Gutter failure is rarely dramatic. It’s a slow, progressive deterioration that causes escalating damage:

debris accumulated in gutters

Stage 1: Reduced Flow

Debris accumulates, sealant begins to fail at joints, or the system settles off pitch. Water flow slows. You may not notice anything from the ground.

water overflowing from gutters

Stage 2: Overflow & Backing Up

Water begins overflowing the front edge during heavy rain. More critically, it backs up behind the trough, saturating the fascia board. The fascia begins to rot from the hidden back side.

structural gutter damage

Stage 3: Structural Damage

Rotted fascia can’t hold the hanger screws. The gutter sags further, increasing the overflow. Ice in winter adds weight, accelerating the pull-away. Eventually, sections separate and water falls to the foundation.

foundational damage from water

Stage 4: Foundation & Interior Damage

Water pooling at the foundation leads to basement moisture, erosion, and settlement. Inside, water intrusion at the roofline can stain ceilings, damage drywall, and promote mold growth in the wall cavity. The cost of maintaining or replacing gutters is a fraction of the cost of repairing the damage caused by failing gutters.

Gutter Questions

What’s the difference between gutters and eavestroughs?

How do I know if my gutters need replacing vs. repair?

Should gutters be replaced when the roof is replaced?

How often should gutters be inspected?

Can I repair a leaking gutter joint myself?

What causes the popping or creaking sounds from my gutters?

Advanced level roofing logo

Gutters That Work as Hard as Your Roof

Whether you need a new installation, targeted repair, or a full replacement, we design gutter systems for performance, not just appearance. Get a free estimate tailored to your home’s specific drainage requirements.